Ferrari 326 MI / 296 MI (1958)
Details
| Chassis | Tubular steel spaceframe |
|---|---|
| Suspension (front) | independent double wishbones, coil springs, hydraulic shock absorbers, anti-roll bar |
| Suspension (rear) | De Dion axle, twin radius arms, coil springs, telescopic shock absorbers |
| Axle track | F: 1,240 mm (48.8 in) R: 1,240 mm (48.8 in) |
| Wheelbase | 2,220 mm (87.4 in) |
| Engine | Dino 3,210.12 cc (195.9 cu in) 65° V6 naturally-aspirated front-engine, longitudinally mounted |
| Transmission | 3-speed manual transmission |
| Tyres | F: 6.00 x 16 R: 8.00 x 16 Firestone |
| Characteristics | Ferrari Dino 326 MI |
|---|---|
| engine | 65° V6 gasoline engine installed longitudinally at the front, cylinder heads and engine block made of aluminum |
| displacement | 3210 cm³ |
| Bore × Stroke | 87×90mm |
| Compression ratio | 10:1 |
| Performance at 1/min | 330 hp (243 kW) at 7250 rpm. |
| Specific performance | 103 hp/l (75.75 kW dm −3 ) |
| Valve control | Two overhead camshafts per cylinder bank, two valves per cylinder |
| Mixture preparation | Three Weber carburettors 50 DCN |
| ignition | Two spark plugs per cylinder, two ignition coils |
| cooling | Water |
| transmission | 3-speed gearbox with reverse gear (rear wheel drive) |
| Brakes | Drum brakes on all wheels |
| Front suspension | Independent suspension on two wishbones of different lengths, coil springs, hydraulic shock absorbers, anti-roll bar |
| Rear suspension | De Dion axle, four trailing arms, coil springs and telescopic dampers |
| Body and frame | Aluminum body, tubular steel frame |
| wheelbase | 2220mm |
| Front/rear track width | – mm / – mm |
| Tire size front | 6.00×16 |
| Rear tire size | 8.00×16 |
| Dimensions L × W × H (mm) | – mm × – mm × – mm |
| Curb weight (without driver) | approx. 580 kg |
| Tank contents | 166 liters |